VM24-512 EXPLODED VIEW

Mikuni VM24-512 Spigot Mount Carburetor

1. Rubber Cap, Throttle Cable VM26/46 002-061
2. Cable Adjuster M21/14 002-062
3. Nut, Cable Adjuster B30/247 002-065
4. Top, Mixing Chamber VM26/44A 002-236
5. Spring, Throttle Valve VM24/195 002-069
7. E-Ring, Jet Needle VM20/369 002-083
9. VM SERIES THROTTLE VALVES / SLIDES
10. Starter Plunger Assembly VM16/210A 007-752
18. O-Ring, Air Screw VM14/75 002-676
19. Spring, Air Screw VM15/112 002-863
21. O-Ring, Idle Adjuster Screw BV32/04 002-212
23. Gasket, Float Bowl VM17/161 007-282
24. Pilot jet -VM22/210
27. Main jet - 4/042
28. Washer, Needle Valve Seat VM26/25 002-188
29. Needle Valve Assembly 2.5 786-15005-2.5 002-892
30. Float VM24/365 007-255
31. Pin, Float BV26/22 002-107
32. Gasket, Float Bowl VM20/492 007-250
34. O-Ring, Drain Plug 17.5 x 1.4 BN042/64 002-602
36. Screw, Float Bowl 4x16mm CW2=0416 002-823
VM SERIES THROTTLE VALVES / SLIDES

007-731 90º adjuster KIT has threads on one end, the other end swivels. Includes rubber cap, locknut, cable adjuster and 90º tube. Works on Keihin and Mikuni carburetor caps.

The KIT 007-731 contains:
002-061 rubber cap
002-065 nut
007-757 adjuster
007-759 90 degree threaded tube

002-064 45º adjuster

002-065 45º Cable Adjuster Locknut B30/247

 

 


002-370 45º Throttle Cable Rubber Cap VM22/18