ROKON

 

****If your jet does not measure like ours do not buy it because it will not work****

All jet sales are final.  
Our year, make model fitment guides can assist but are not 100% accurate due to numerous reasons. We have no control over jets once they leave us; some customers drill them out, test and tune etc.  See also additional things to check before ordering. If needing help send us a picture of the jets removed from the carb and also read identify that jet

Please take a moment right now to measure the jet prior to ordering.


*** If your jet does not measure like ours do not buy it because it will not work ****

TYPICAL JET SIZE:
Main Jet - *
Slow Jet - *
*Typical size only- verify jet size and compare dimensions to those listed before ordering. See Jet Finder for other jets available.

JETS price each jet BE SURE AND MEASURE BEFORE ORDERING
Mikuni Pilot N101.043

jet mikuni n101.043
OVERALL LENGTH = 16.0 mm
THREAD DIAMETER = 5.9 mm
LARGEST DIAMETER = 6.5 mm
GENUINE mikuni jets - price each *

GENUINE Mikuni jet 30 $7.29
GENUINE Mikuni jet 32.5 $7.29
GENUINE Mikuni jet 35 $7.29
GENUINE Mikuni jet 37.5 $7.29
GENUINE Mikuni jet 40 $7.29
GENUINE Mikuni jet 42.5 $7.29
GENUINE Mikuni jet 45 $7.29
GENUINE Mikuni jet 47.5 $7.29
GENUINE Mikuni jet 50 $7.29
GENUINE Mikuni jet 55 $7.29
GENUINE Mikuni jet 60 $7.29
GENUINE Mikuni jet 70 $7.29
GENUINE Mikuni jet 80 $7.29
GENUINE Mikuni jet 90 $7.29
GENUINE Mikuni jet 130 $7.29
GENUINE Mikuni jet 140 $7.29
GENUINE Mikuni jet 150 $7.29
GENUINE Mikuni jet 160 $7.29


 
carb bowl screws
CARB BOWL SCREW - Sold each, modify cart for desired quantity *
Stainless steel allen head screw for carb bowl.
Length dimension is the shaft length of the fastener not including the length of the head.
Example: M4 x 10 (10 mm shaft length)
Sold each carb bowl screw M4 x 10 (0.39") $1.49
Sold each carb bowl screw M4 x 12 (0.47") $1.55
Sold each carb bowl screw M4 x 14 (0.55") $1.59
Sold each carb bowl screw M5 x 16 (0.62") $1.61
Sold each carb bowl screw M5 x 20 (0.78") $1.63

NEEDLE SHIM WASHERS
Stainless washers.
These are not a precision part, they simply raise the needle.

Needle shim most Mikuni 2.7mm ID x 6.30mm OD 0125A2M2.7 JRU-8027A 10 pieces

Needle shim most Keihin 3.2mm ID x 7mm OD 0125A2M3.2 JRU-8032 10 pieces

Needle shim 3.7mm ID x 7.9mm OD 0125A2M3.7 JRU-8037B 10 pieces

wrench_hex_carb_bowl
HEX wrench for carb bowl screws
hex wrench
Metric hex wrench short arm for screws $0.87
Extra short arm ball end for tight fitting areas 19109

TORX wrench for carb bowl screws
Extra short arm for tight fitting areas TORX 19110- note our screws are hex, this item is placed here as some carbs use torx screws.