MIKUNI TM SERIES FLATSLIDE CARBURETORS


TM Flat Slide Standard Jetting Specifications
Carb Main jet Main air jet Pilot jet Pilot air jet Needle jet Jet needle Throttle valve Float height Mikuni part Part number
TM24 4/042 #130 Fixed VM22/210 #15 454 Series #Q-0 5N13 832-30006 #3.0 23mm TM24-8001 001-017
TM28 4/042 #180 1.8 VM22/210 #15 175 Series #P-8 5DP39 832-33001 #2.5 23mm VM28-418 001-023
TM32 4/042 #250 None VM22/210 #45 389 Series #Q-2 5FP17 832-39012 #4.0 18mm TM32-1 001-026
TM34 4/042 #280 None VM22/210 #50 389 Series #Q-2 5FP17 832-39012 #4.0 18mm TM34-2 001-033
TM Flat Slide with Accelerator Pump Standard Jetting Specifications
Carb Main jet Main air jet Pilot jet Pilot air jet Needle jet Jet needle Throttle valve Float height Mikuni part Part number
TM36 N100.64 #130 None VM28/486 #12.5 1.0 568 Series #P-8 9DZH6-50 TM36/137 #2.0 19mm TM36-68 001-552
*47mm = Spigot O.D. size, *43mm = Spigot O.D size.
For exploded view carb parts

TM POWER JET KIT

TM POWERJET KIT 002-041
The Power Jet Kit is used on 2-stroke engine applications to improve mid-range throttle response and add additional fuel to wide open throttle running conditions. Easily installs on TM series Carburetors (#80, #100 and #120 sized jets included). Sold as a kit.

TM Cable Type Starter System Kit. Replaces knob plunger type starter system with a cable type starter
system. Sold as a kit. Two Kits available:

Order No. 002-351
Fits the following TM Carburetors: TM32, TM34, TM36, TM38
and 39mm Pro-Series, 41mm Pro-Series
Includes items A - F.

Order No. 002-353
Fits the following TM carburetor: VM28/418 (TM28)
Includes items A - F.

 

A. Starter Plunger Top, Rubber Cap VM26/46 002-061
B. Cable Adjuster M21/14 002-062
C. Cable Adjuster Locknut B30/247 002-065
D. Starter Plunger Fitting VM15/37 002-093
E. Starter Plunger Spring VM32/69 002-094
F. Starter Plunger (TM32-TM41) VM15SC4/85 002-095
Starter Plunger (TM28) VM15SC4/86 007-751

Pilot jet VM22-210
Main Jet 4/042

TM Series Throttle valves

TM24 (TM24-8001) 3.0 832-30005 002-951
TM28 (VM28-418) 2.5 832-33001 002-804
TM32 (TM32-1) 4.0 832-39012 002-800
TM34 (TM34-2) 4.0 832-39012 002-800

Old Style TM 36, TM38 Carburetor with Top Idle Adjuster Rod
TM36 (TM 36-2), TM38 (TM38-1, TM38 (TM38-3)
2.5 832-43002 002-734 No longer available
3.0 832-43002 002-735 No longer available
4.0 832-43002 002-737
5.0 832-43002 002-739 No longer available

New Style TM 38 Carburetor, with Side Idle Adjuster Screw
TM38 (TM38-85), TM38 (TM38-86)
2.5 832-43011 007-401
3.0 832-43011 007-402
3.5 832-43011 007-403
4.0 832-43011 007-404
4.5 832-43011 007-405

TM33 Pumper (TM33-8012) 1.5 832-38007 002-948


see mounting flange dimensions here
TM40 (HS40) Rubber Flange Adapters HS40-6K I-VM36-200-1 002-054
TM40 (HS40) Rubber Flange Adapters HS40 All KHS-004 002-986

HS40 Carb Adapter EVO Adapter Ring MK-413 005-095
 

TM40 (HS40) Throttle Cables Throttle Cable (Pull) RS36/34-A 007-210
TM40 (HS40) Throttle Cables Idle Cable (Push) RS36/35-A 007-211



Jet Needles TM36
LEAN Jet Needle TM36 #9DZH06-50 (Std) 007-109
  Jet Needle TM36 #9EBY01-51 2.51 Leaner 007-106
RICH Jet Needle TM36 #9EBY01-50 2.50 Richer 007-105

Jet Needles TM40 (HS40)
LEAN Jet Needles TM40 (HS40) #9DJY01 2.97 007-015
  Jet Needles TM40 (HS40) #9DJY03 2.96 007-017 extremely similar to 9DJY04
  Jet Needles TM40 (HS40) #9DJY04 2.98 007-018 standard in TM40-6 (HS40)
RICH Jet Needles TM40 (HS40) #9DJY02 2.95 007-016

007-731This adjuster has threads on one end, the other end swivels. Includes rubber cap, locknut, cable adjuster and 90ยบ tube. Works on Keihin and Mikuni carburetor caps.

The kit 007-731 contains:
002-061 rubber cap
002-065 nut
007-757 adjuster
007-759 90 degree threaded tube

 
FOR EXPLODED VIEW PARTS